EBC Redstuff Brake Pad Sets (Rears Only) - DP31537C

• About Product
• Additional Details
• About the Brand
• Vehicle Fitment
• Product Videos

Brake rotors and pads are essential parts to making sure your vehicle is stopping promptly. By upgrading your brake pads and rotors, your vehicle will be able to handle more aggressive braking for longer periods of time.

Upgrading your OEM brake pads to a set of performance brake pads is a great way to increase the stopping power of your brakes. When driving aggressively, you may experience some brake fade. Upgrading your brake pads to a set of performance brake pads will help reduce brake fade and ensure that your can stop when necessary.

Redstuff Ceramic Low Dust Brake Pads; FMSI Pad No. D961; Vented; 316mm Dia.; 68mm Height; 20mm Thick; 58mm Center Hole Dia.; Pad Dimensions: 76 x 65 x 14mm;

DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

Brake Location: REAR

Warning: This product listing contains generic images

Installation Instructions

1. Click to Download
2. Click to Download

With a worldwide work force of over 400 people, EBC Brakes is an independently owned and managed leader in the brake market, proud of its customers, its products, its success and its people. EBC Brakes produce the largest range of brake pads and brake discs in the world, with over 5000 part numbers for every type of moving vehicle. EBC Brakes are made in one of its two specialist factories in the UK and USA. The majority of EBC brake discs or brake rotors are also made in the UK.