ReadyLIFT 69-9420 2.0'' SST Lift Kit 2.0'' Front, 1.5'' Rear - 69-9520

• About Product
• About the Brand
• Vehicle Fitment

Additional Details

2.0 SST Lift Kit - 2015-19 Subaru Outback

Allows for up to a 245/65-17 tire on a 17x8 wheel with +38 offset

2 front lift / 1.5 rear lift

Increases ground clearance

ReadyLIFT now offers a great lift solution for the 2015-2019 Subaru Outback. The Subaru Outback has become extremely popular with adventure enthusiasts. Using the same lift technology developed for the CrossTrek, our engineers have designed a brand new lift solution that will raise the 2015-2019 Subaru Outback 2 for a taller stance that increases ground clearance and allows for larger tires.

Using our time-tested lift engineering technology from our award-winning, best-selling truck and Jeep lift kits, our engineers developed the 69-9520 SST Lift Kit for 2015-2019 Outback vehicles to provide 2 of front lift and 1.5 of rear lift for trouble-free Subaru adventures. Both front and rear offset design spacers are fabricated from heavy-duty steel and protected with a durable powder coat finish. We also provide front/rear sway bar mount extensions to ensure your suspension performs perfectly on or off road. This lift combination creates an exceptional improved stance that, when combined with a P245 tire, results in a substantial increase of ground clearance at the rockers.

Learn why you don't need cradle drop spacers on current generation Subaru vehicles.

This kit is completely bolt-on and requires no modifications, installs in half the time of other kits, and retains the factory camber/caster for ideal alignment courtesy of our unique offset spacer design. The 69-9520 lift kit also includes front and rear sway bar brackets to relocate the end links back to the factory angles.

This new Outback SST Lift Kit maintains the factory ride while accommodating up to a brawny 245/65-17 tire on a 17x8 wheel with +38 mm offset and requires no trimming.

If you are looking for a premium quality lift kit for your Outback, our 2 lift kit is perfect for you without having to overpay for components you don't need.

• Allows for up to a 245/65-17 tire on a 17x8 wheel with +38 offset
  

• Lift kits are vehicle-specific engineered to the highest standards.

• Offset designed fabricated heavy-duty steel plate top-mount strut extensions maintain factory alignment geometry.

• Easy, bolt-on installation - no permanent modifications.

• Delivers increased ground clearance.

• Allows for increased tires sizes that are ideal for trail adventures.

• Made in USA.

NOTE:  Some lifted Subaru models may exhibit low speed 'rumble' or 'wobble' between 17-22 MPH.  This is the result soft and/or aging rubber in the factory transmission mount that may become noticeable with the new CV angles of the lifted vehicle.  The issue can be addressed with an affordable aftermarket 'anti-wobble' transmission mount or mount insert.

Allows for up to a 245/65-17 tire on a 17x8 wheel with +38 offset

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Front/Rear heavy-duty fabricated steel spacers

Front/Rear sway bar relocation brackets

All necessary hardware.

Suspension components are key to making sure you car is riding smoothly on or off the road. With upgraded suspension components, you can unlock the full potential of your vehicles performance.

ReadyLIFT® Suspension Inc. was founded in 2006 on the principals of developing a line of economical yet innovative suspension leveling products that would allow Truck and SUV owners to be able to “level” their vehicle in order to install Plus-size wheels and tires. ReadyLIFT realized that there was a huge consumer market that didn’t want a big lift kit that would compromise fuel economy along with the factory ride and handling. The original ReadyLIFT line of suspension products was developed to provide consumers with a cost-effective alternative for their needs, essentially designing the exact product they were looking for – clearance for bigger wheels and tires, an improved ‘leveled’ stance, and that “factory” ride & handling.